? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpt1606 series document 214 -1 document 214-1 revised 04/27/05 the lpt1606 power wafer ? is a very small self-shielded power inductor. its toroid construction minimizes stray noise while its 2 mm height and tiny footprint free up board space. the 1 h part has a saturation current rating of 3 a, remarkable for an inductor this size. the flat top ceramic case is ideal for pick and place handling. part l 20% 1 dcr max srf typ i sat 2 i rms 3 number (h) (ohms) (mhz) (a) (a) lpt1606-102 1.0 0.11 840 3.0 2.0 LPT1606-152 1.5 0.13 505 2.4 1.8 lpt1606-222 2.2 0.16 360 1.8 1.6 lpt1606-332 3.3 0.195 230 1.6 1.5 lpt1606-472 4.7 0.24 165 1.2 1.5 lpt1606-682 6.8 0.345 130 1.1 1.3 lpt1606-103 10 0.44 80 0.8 1.1 lpt1606-153 15 0.65 60 0.7 0.9 lpt1606-223 22 0.83 25 0.6 0.8 this product has been discontinued as of september 1, 2000 a recommended alternative is the do1606 series (page 85). existing customers will continue to be supported. for further information, please contact coilcraft. terminations: silver-palladium-platinum tape and reel: 750/7 reel; 2500/13 reel 8 mm tape width 1. inductance tested at 100 khz, 0.1 vrms. 2. dc current at which the inductance drops 30% (typ) from its value without current. 3. average current for a 40c temperature rise from 25c ambient. 4. operating and storage temperature range ? 40c to +85c. 5. electrical specifications at 25c. see qualification standards section for environmental and test data.
? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. typical l vs current smt power inductors - lpt1606 series document 214 -2 document 214-2 revised 04/27/05
|